hardware

FlexRIO SSV16-R+

FlexRIO SSV16-R+

Real-time monitoring of signals with high channel count 

When a large number of signal channels need to be continuously monitored, conventional solutions quickly reach their limits. Either the number of channels is very limited or the signal analysis takes too long, making it impossible to monitor continuously or only at a reduced speed. 

Our SSV FlexRIO Module provides seamless real-time monitoring of up to 16 channels per card. The signal analysis is performed directly on the card, without the need to exchange data with the host system. The monitoring program only retrieves the current measurements and error entries as needed. 


Technical Description 

Each card features independent and combinable triggers per channel. Each channel can define up to ten monitoring windows with up to six real-time tests. Each function also stores the number of errors found until the next inquiry. In case of an error, a screenshot of all signals around the error point (pre- and post-samples) is temporarily stored until retrieval. 

A user-friendly editor allows easy editing and testing of channel, trigger, and analysis settings. It can also serve as a manual test interface if needed. Through programming interfaces in LabVIEW, ActiveX and Microsoft .NET, the system can be easily integrated into nearly any application (e.g., NI TestStand, NI LabVIEW, Agilent TestExec SL, VBScript). 

Real-time monitoring of signals with high channel count 

When a large number of signal channels need to be continuously monitored, conventional solutions quickly reach their limits. Either the number of channels is very limited or the signal analysis takes too long, making it impossible to monitor continuously or only at a reduced speed. 

Our SSV FlexRIO Module provides seamless real-time monitoring of up to 16 channels per card. The signal analysis is performed directly on the card, without the need to exchange data with the host system. The monitoring program only retrieves the current measurements and error entries as needed. 


Technical Description 

Each card features independent and combinable triggers per channel. Each channel can define up to ten monitoring windows with up to six real-time tests. Each function also stores the number of errors found until the next inquiry. In case of an error, a screenshot of all signals around the error point (pre- and post-samples) is temporarily stored until retrieval. 

A user-friendly editor allows easy editing and testing of channel, trigger, and analysis settings. It can also serve as a manual test interface if needed. Through programming interfaces in LabVIEW, ActiveX and Microsoft .NET, the system can be easily integrated into nearly any application (e.g., NI TestStand, NI LabVIEW, Agilent TestExec SL, VBScript). 

Technical Specifications

  • Galvanic Isolation of the Inputs 

  • Signal Level up to ±100 V (configurable measurement range) 

  • Resolution: 14 Bit 

  • Digital Inputs and Outputs: 4 digital inputs (with optional trigger function), 4 digital outputs 

  • SSV16: 16 differential channels at 1 MS/s per channel 

  • Test Functions: Average, Upper Limit, Lower Limit, Duty Cycle, Edge Counter, Area Check 

  • Trigger Sources: Channel / Reference / Timer 

  • Waveform Storage: 1.5 seconds 


Application Areas

  • Monitoring the Effects of EMC Pulses on Control Units 

  • Simultaneous Measurement of All Signals from Control Units in Production Lines 


With its high channel count, real-time processing, and flexible integration, the Signal Supervision Module is a powerful solution for demanding signal analysis and monitoring. 

Technical Specifications

  • Galvanic Isolation of the Inputs 

  • Signal Level up to ±100 V (configurable measurement range) 

  • Resolution: 14 Bit 

  • Digital Inputs and Outputs: 4 digital inputs (with optional trigger function), 4 digital outputs 

  • SSV16: 16 differential channels at 1 MS/s per channel 

  • Test Functions: Average, Upper Limit, Lower Limit, Duty Cycle, Edge Counter, Area Check 

  • Trigger Sources: Channel / Reference / Timer 

  • Waveform Storage: 1.5 seconds 


Application Areas

  • Monitoring the Effects of EMC Pulses on Control Units 

  • Simultaneous Measurement of All Signals from Control Units in Production Lines 


With its high channel count, real-time processing, and flexible integration, the Signal Supervision Module is a powerful solution for demanding signal analysis and monitoring. 

you might also be interested in this

CAN-FD

6 CAN-FD interfaces

CAN-FD

6 CAN-FD interfaces

cRIO FaultSim6

Simulation of electrical small signal faults

cRIO FaultSim6

Simulation of electrical small signal faults

cRIO OPIF 5MBit/s

Optical communication via optical fibers up to 5MBit/s

cRIO OPIF 5MBit/s

Optical communication via optical fibers up to 5MBit/s

CAN-FD

6 CAN-FD interfaces

CAN-FD

6 CAN-FD interfaces

cRIO FaultSim6

Simulation of electrical small signal faults