Some power supply drivers have additional parameters besides the standard ones described in here.
1.1.2.2.1.2.1Delta.PSC232
| Parameter | Meaning | Examples |
|---|---|---|
| Address | This parameter is mandatory. It specifies the internal device address (not to be confused with the COM port). | 1 4 6 |
| Baud Rate | This parameter is mandatory. It specifies the baud rate for the communication. | 9600 19200 |
1.1.2.2.1.2.2EA.PSI800R
| Parameter | Meaning | Examples |
|---|
1.1.2.2.1.2.3Model
| Parameter | Meaning | Examples |
|---|---|---|
| Model | This parameter is mandatory. It specifies the Model of the Power Supply. | PSI800R PS80002U_3U |
1.1.2.2.1.2.4Keysight.E363X
| Parameter | Meaning | Examples |
|---|---|---|
| Data Bits | This parameter is mandatory. It specifies the Data bits. | 8 7 |
| Parity | This parameter is mandatory. It specifies the Parity bit. | odd even mark |
| Flow | This parameter is mandatory. It specifies the Serial Flow Control. | xon/xoff dtr/dsr |
| Baud Rate | This parameter is mandatory. It specifies the baud rate for the communication. | 9600 19200 |
1.1.2.2.1.2.5Kniel
| Parameter | Meaning | Examples |
|---|
1.1.2.2.1.2.6Kniel.New
| Parameter | Meaning | Examples |
|---|---|---|
| Node | This parameter is optional. It specifies the internal device address (not to be confused with the COM port). | 1 |
| Baud Rate | This parameter is mandatory. It specifies the baud rate for the communication. | 9600 19200 |
1.1.2.2.1.2.7Sim
| Parameter | Meaning | Examples |
|---|---|---|
| SimulateInitError | This parameter is optional. It specifies if a Error should occur while initialization | True False |
1.1.2.2.1.2.8TDK.Gensys
| Parameter | Meaning | Examples |
|---|---|---|
| Address | This parameter is mandatory if the PS is connected via a COM port. It specifies the internal device address (not to be confused with the COM port). | 1 4 6 |
| Baud Rate | This parameter is mandatory if the PS is connected via a COM port. It specifies the baud rate for the communication. | 9600 19200 |
1.1.2.2.1.2.9TDK.GensysPlus
| Parameter | Meaning | Examples |
|---|---|---|
| Address | This parameter is mandatory if the PS is connected via a COM port. It specifies the internal device address (not to be confused with the COM port). | 1 3 6 |
| Baud Rate | This parameter is mandatory if the PS is connected via a COM port. It specifies the baud rate for the communication. | 9600 19200 |
1.1.2.2.1.2.10TDK.LambdaZ
| Parameter | Meaning | Examples |
|---|---|---|
| Address | This parameter is mandatory if the PS is connected via a COM port. It specifies the internal device address (not to be confused with the COM port). | 1 3 6 |
| Baud Rate | This parameter is mandatory if the PS is connected via a COM port. It specifies the baud rate for the communication. | 9600 19200 |