Diese Seite gibt es noch nicht auf Deutsch, daher wird die englische Fassung angezeigt.
Kapitel 1.1.2.2.1.2
Driver Specific Parameters
Some power supply drivers have additional parameters besides the standard ones described in here.
1.1.2.2.1.2.1Delta.PSC232
| Parameter | Meaning | Examples |
|---|---|---|
| Address | This parameter is mandatory. It specifies the internal device address (not to be confused with the COM port). | 1 4 6 |
| Baud Rate | This parameter is mandatory. It specifies the baud rate for the communication. | 9600 19200 |
1.1.2.2.1.2.2EA.PSI800R
| Parameter | Meaning | Examples |
|---|
1.1.2.2.1.2.3Model
| Parameter | Meaning | Examples |
|---|---|---|
| Model | This parameter is mandatory. It specifies the Model of the Power Supply. | PSI800R PS80002U_3U |
1.1.2.2.1.2.4Keysight.E363X
| Parameter | Meaning | Examples |
|---|---|---|
| Data Bits | This parameter is mandatory. It specifies the Data bits. | 8 7 |
| Parity | This parameter is mandatory. It specifies the Parity bit. | odd even mark |
| Flow | This parameter is mandatory. It specifies the Serial Flow Control. | xon/xoff dtr/dsr |
| Baud Rate | This parameter is mandatory. It specifies the baud rate for the communication. | 9600 19200 |
1.1.2.2.1.2.5Kniel
| Parameter | Meaning | Examples |
|---|
1.1.2.2.1.2.6Kniel.New
| Parameter | Meaning | Examples |
|---|---|---|
| Node | This parameter is optional. It specifies the internal device address (not to be confused with the COM port). | 1 |
| Baud Rate | This parameter is mandatory. It specifies the baud rate for the communication. | 9600 19200 |
1.1.2.2.1.2.7Sim
| Parameter | Meaning | Examples |
|---|---|---|
| SimulateInitError | This parameter is optional. It specifies if a Error should occur while initialization | True False |
1.1.2.2.1.2.8TDK.Gensys
| Parameter | Meaning | Examples |
|---|---|---|
| Address | This parameter is mandatory if the PS is connected via a COM port. It specifies the internal device address (not to be confused with the COM port). | 1 4 6 |
| Baud Rate | This parameter is mandatory if the PS is connected via a COM port. It specifies the baud rate for the communication. | 9600 19200 |
1.1.2.2.1.2.9TDK.GensysPlus
| Parameter | Meaning | Examples |
|---|---|---|
| Address | This parameter is mandatory if the PS is connected via a COM port. It specifies the internal device address (not to be confused with the COM port). | 1 3 6 |
| Baud Rate | This parameter is mandatory if the PS is connected via a COM port. It specifies the baud rate for the communication. | 9600 19200 |
1.1.2.2.1.2.10TDK.LambdaZ
| Parameter | Meaning | Examples |
|---|---|---|
| Address | This parameter is mandatory if the PS is connected via a COM port. It specifies the internal device address (not to be confused with the COM port). | 1 3 6 |
| Baud Rate | This parameter is mandatory if the PS is connected via a COM port. It specifies the baud rate for the communication. | 9600 19200 |