# WebServer

URL: https://irs.systems/en/docs/mini-pwz-ii/webserver

You can reach the WebServer in a browser by entering either the IP address or the host name (for example, *irs24bg00961.local*).

The menu is on the left-hand side and has three options:

![Menu: Angle and Mode Config, Delay Config, System Info](/docs/assets/mini-pwz-ii/images/pwz-web-menu.png)

## Angle and Mode Config

You can configure the mode, switch-on angle and switch-off angle individually for each channel.
You can set the phase angles in the range from -180° to +540°.
The different modes are explained in more detail in the section [Functional Description](/en/docs/mini-pwz-ii/functional-description#operating-modes).

![Current Output Configuration and Set Output Configuration page](/docs/assets/mini-pwz-ii/images/pwz-web-angle-mode.png)

This page also shows information about the reference signal.

![Input Information: Input amplitude, offset, frequency, SPLL Signal Detected, SPLL Is Locked](/docs/assets/mini-pwz-ii/images/pwz-web-input-info.png)

## Delay Config

You can configure the switch-on and switch-off delays individually for each channel.

![Current Delay Configuration and Set Delay Configuration page](/docs/assets/mini-pwz-ii/images/pwz-web-delay-config.png)

## System Info

Among other things, this page shows the installed variants of the input and output modules and any errors that have occurred.

![System Information with firmware version, variant, Module ID](/docs/assets/mini-pwz-ii/images/pwz-web-system-info.png)

You can also configure the network settings here.

![IP Address Configuration with static IP, subnet mask, gateway and host name](/docs/assets/mini-pwz-ii/images/pwz-web-ip-config.png)